3com WXR100 3CRWXR10095A User Manual

To display a summary of the security ACLs mapped on a MAP (in this 
example, MAP 7), type the following command:

WX# display ap acl map 7
ACL

Type Class

Mapping

---------------------------- ---- ------ -------
acl_123

IP

Static In

acl_133

IP

Static In

acl_124

IP

Static 

To clear the mapping between a security ACL and one or more ports, 
VLANs, virtual ports, or Distributed MAPS, first display the mapping with 
display security acl map and then use clear security acl map to 
remove it. This command removes the mapping, but not the ACL. 

For example, to clear the security ACL acljoe from a port, type the 
following commands: 

WX1200# display security acl map acljoe
ACL acljoe is mapped to:
Port 4 In
WX1200# clear security acl map acljoe port 4 in
success: change accepted.

After you clear the mapping between port 4 and ACL acljoe, the 
following is displayed when you enter display security acl map:

WX1200# display security acl map acljoe
ACL acljoe is mapped to:

Clearing a security ACL mapping does not stop the current filtering 
function if the ACL has other mappings. If the security ACL is mapped to 
another port, a VLAN, a virtual port, or a Distributed MAP, you must enter 
a clear security acl map command to clear each map. 

To stop the packet filtering of a user-based security ACL, you must modify 
the user’s configuration in the local database on the WX switch or on the 
RADIUS servers where packet filters are authorized. For information 
about deleting a security ACL from a user’s configuration in the local WX 
database, see “Clearing a Security ACL from a User or Group” on 
page 495. To delete a security ACL from a user’s configuration on a 
RADIUS server, see the documentation for your RADIUS server.