3com WXR100 3CRWXR10095A User Manual

Page of 728
First-Time Configuration via the Console
57
3WXM Enable Password
If you use 3WXM to continue configuring the switch, you will need to enter the switch’s enable password when you upload the switch’s configuration into 3WXM. (For 3WXM information, see the 
Wireless 
Switch Manager Reference Manual
.)
Authenticating at the
Console
You can configure the console so that authentication is required, or so 
that no authentication is required. 3Com recommends that you enforce 
authentication on the console port.
To enforce console authentication, take the following steps:
Add a user in the local database by typing the following command with a 
username and password:
WX1200# set user username password password
success: change accepted.
To enforce the use of console authentication via the local database, type 
the following command:
If you type this command before you have created a local username and 
password, you can lock yourself out of the 
WX switch. Before entering 
this command, you must configure a local username and password.
WX1200# set authentication console * local
To store this configuration into nonvolatile memory, type the following 
command:
WX1200# save config
success: configuration saved.
By default, no authentication is required at the console. If you have 
previously required authentication and have decided not to require it 
(during testing, for example), type the following command to configure 
the console so that it does not require username and password 
authentication:
WX1200# set authentication console * none