3com WXR100 3CRWXR10095A User Manual

C

HAPTER

 27: M

ANAGING

 S

YSTEM

 F

ILES

The above command copies the file to the same filename. To rename the 
file when copying it, type the following command:

WX1200# copy tftp://10.1.1.1/newconfig wxconfig
success: received 637 bytes in 0.253 seconds [ 2517 
bytes/sec]

To copy system image wxb04102.rel from a TFTP server to boot partition 
1 in nonvolatile storage, type the following command:

WX1200# copy tftp://10.1.1.107/wxb04102.rel boot1:wxb04102.rel
................................................................................
............................success: received 9163214 bytes in 105.939 seconds 
[ 86495 bytes/sec]

To rename test-config to new-config, you can copy it from one name to 
the other in the same location, and then delete test-config. Type the 
following commands:

WX1200# copy test-config new-config
WX1200# delete test-config
success: file deleted.

To copy file corpa-login.html from a TFTP server into subdirectory corpa in 
a WX switch’s nonvolatile storage, type the following command:

WX1200# copy tftp://10.1.1.1/corpa-login.html corpa/corpa-login.html
success: received 637 bytes in 0.253 seconds [ 2517 bytes/sec]

If you download an image file from the 3Com support site and install it in 
a switch’s boot partition, you can verify that the file has not been 
corrupted while being copied. 

md5 [boot0: | boot1:]filename

To verify an image file’s integrity:

1 Download the image file from the 3Com support site onto a TFTP server, 

and use the CLI copy tftp command on the WX switch to copy the 
image onto the switch’s nonvolatile storage.

2 On the 3Com support site, click on the MD5 link next to the link for the 

image file, to display the MD5 checksum for the file. Here is an example:

b9cf7f527f74608e50c70e8fb896392a wxb04102.rel

3 On the WX switch, use the dir command to display the contents of 

nonvolatile storage.