3com WX1200 3CRWX120695A User Manual

To clear the VLAN profile that had been applied to MAP 7, type the 
following command:

WX# clear ap 7 local-switching vlan-profile
success: change accepted.

To remove a VLAN profile or individual entries from a VLAN profile, use 
the 

following command:

clear vlan-profile profile-name [vlan vlan-name]

You can use this command to remove individual VLANs from a VLAN 
profile, or to remove an entire VLAN profile. If you remove all of the 
entries from a VLAN profile, the VLAN profile itself is removed.

If a VLAN profile is changed so that traffic that had been tunneled to a 
WX switch is now locally switched by MAPs, or vice-versa, the sessions of 
clients associated with the MAPs where the VLAN profile is applied are 
terminated, and the clients must re-associate with the MAPs.

To remove the entry for VLAN red from VLAN profile locals type the 
following command:

WX# clear vlan-profile locals vlan red
WX#

To remove VLAN profile locals, type the following command:

WX# clear vlan-profile locals
WX#