3com WX1200 3CRWX120695A User Manual

C

HAPTER

 14: C

ONFIGURING

 RF A

UTO

-T

UNING

To display the RF Auto-Tuning settings that you can configure on an 
individual radio, use the following commands:

display ap config [port-list [radio {1 | 2}]]
display ap config [ap-num [radio {1 | 2}]]

To display the RF Auto-Tuning and other individual radio settings on radio 
1 of a directly connected MAP connected to WX port 2, type the 
following command:

WX# display ap config 2 radio 1
Port 2: AP model: mp-352, POE: enabled, bias: high, name: 
MAP02
boot-downloaded-enable: YES
force-image-download: NO
Radio 1: type: 802.11g, mode: disabled, channel: 5
tx pwr: 1, profile: default
auto-tune max-power: default

To display the RF Auto-Tuning and other individual radio settings on both 
radios 

on the MAP access point configured on connection 1, type the 

following command:

WX# display ap config 1
Dap 1: serial-id: 12345678, AP model: mp-352, bias: high, name: DAP01

fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
boot-download-enable: YES
force-image-download: NO

Radio 1: type: 802.11g, mode: disabled, channel: 6
tx pwr: 1, profile: default
auto-tune max-power: default
Radio 2: type: 802.11a, mode: disabled, channel: 36
tx pwr: 1, profile: default
auto-tune max-power: default

To display the other radios that a specific 3Com radio can hear, use the 
following commands:

display auto-tune neighbors [ap map-num [radio {1 | 2| all}]]

display auto-tune neighbors 
[ap ap-num [radio {1 | 2 | all}]

The list of radios includes beaconed third-party SSIDs, and both beaconed 
and unbeaconed 3Com SSIDs.