3com WX1200 3CRWX120695A User Manual

5 Commit the new ACL to the configuration, using the following 

command:

6 Change the Web-Portal ACL name set on the service profile, using the 

following command:

set service-profile name web-portal-acl aclname

7 Verify the change by displaying the service profile. 

8 Save the configuration changes.

When a client that has connected through Web Portal WebAAA enters 
standby or hibernation mode, MSS may place the client’s Web Portal 
WebAAA session in the Deassociated state. 

A Web Portal WebAAA session can be placed in the Deassociated state 
under the following circumstances:

„

The client has been idle for the User idle-timeout period, which can 
happen when the client is in standby or hibernation mode

„

The client explicitly deassociates from the MAP by sending an 802.11 
disassociate message

„

The MAP handling the client's session appears to be inoperative from 
the WX switch

When a Web Portal WebAAA session enters the Deassociated state, it 
stays in that state until one of the following takes place:

„

The client reappears on this MAP or another MAP managed by a WX 
switch, at which time the Web Portal WebAAA session enters the 
Active state

„

The Web Portal WebAAA session is terminated administratively

„

The Web Portal WebAAA session timeout period expires, at which 
time the Web Portal WebAAA session is terminated automatically

By default, the Web Portal WebAAA session timeout period is 5 seconds. 
You can optionally change the length of the Web Portal WebAAA Session 
Timeout period. This can be useful if you want to allow a client 
connecting through Web Portal WebAAA to enter standby or hibernation 
mode, then be able to resume its session after waking up, without having 
to log in again.