3com wx3010 ac poe 8get 2sfp User Manual

 

5-20 

1)  Set up an update environment 

Set up an environment, with the device as an FTP server 

 

 

z

 

For operations on the access control engine, the data needs to be transferred from the switching 
engine to the access control engine; therefore, you need to configure the IP addresses of the 
switching engine, access control engine and the PC to be in the same network segment. For 
example, configure the IP address of the FTP client as 192.168.0.1, that of the access control 
engine of the device as 192.168.0.2, and that of the switching engine as 192.168.0.3 (to configure 
the IP address of the switching engine, you need to change to CLI of the switching engine by using 
the oap command). Verify the connection by using the ping command. 

z

 

For operations on the switching engine, you need to log in to the switching engine using the oap 
command, configure the IP addresses as mentioned above, and verify the connection by using the 

 command.   

2)  Enable the FTP server 

The FTP server feature supports concurrent access of multiple clients. Upon receiving a request from 
an FTP client, the FTP server performs the requested operation and returns the result. Use the following 
command to enable FTP server:  

[System]ftp server enable 

% Start FTP server   

Add an authorized FTP username and password:  

[System]local-user guest                                          // Create user account guest 

[System-luser- guest]service-type ftp                            // Set the user type to FTP 

[System-luser- guest]password simple 123456                 // Set the password to 123456 

3) Maintain 

the 

device 

After enabling FTP server and setting the username and password on the device, start the FTP client 
application on the PC. This example assumes that you use Microsoft FTP Client provided in Windows 
XP.  

Open a DOS prompt window, and enter ftp at the DOS prompt.  

C:\Documents and Settings\Administrator>ftp 

ftp>                                                     // The system prompt changed to ftp> 

ftp> open 192.168.0.2                                                  // Connect to the device 

Connected to 192.168.0.2.