3com V7000 User Manual

 

This section describes how to use the Telephone User Interface (TUI) to 
view, and possibly modify, the VCX features associated with the Access 
buttons on your telephone. You can also use the VCX User Interface to 
view and modify button mappings (see 

).

When a VCX system is configured, your administrator assigns (maps) 
default functions for the Access buttons on your telephone. Mapping a 
function to a button allows one-touch access to that function. Speed 
dialing is one example of a one-touch function. 

Your administrator may allow you to reprogram a button’s function (for 
example, create more personal speed dial buttons). Consequently, a 
programmable button is one of the following states:

■

Locked — Button function can be changed only by the administrator.

However, if the button function requires additional information (for 
example, a speed dial number or a call forward destination number), 
you can choose the values for the parameters. There are two 
exceptions: 

■

BLF (Busy Lamp Field) — Displays the status of another user's 
phone. When you press the button associated with the BLF status 
light, the BLF function calls the other user’s phone. 

■

System Speed Dial — Dials an administrator-configured speed dial 
number.

The additional information for these two functions is set by the 
administrator and you cannot change the values if the buttons are 
in the locked state.

■

Unlocked — Button function and any associated values can be 
completely reconfigured by you or the administrator.

Note that, if a button function requires additional information (for 
example, a call forward destination number) and you or your 
administrator have not configured this information, the system will 
prompt you for it when you press the button.

As noted in 

, the 18 programmable Access buttons for the 

Model 3102 phone are located in two columns on the right side of the 
phone.