3com WX4400 3CRWX440095A User Manual
U
SING
RF A
UTO
-T
UNING
WITH
M
ODELLING
What Is RF
Auto-Tuning with
Modelling?
Auto-Tuning with
Modelling?
RF Auto-Tuning with modelling is a technique you can use to configure
and implement your network that builds on the RF Auto-Tuning method.
You will, as the name implies, still use RF Auto-Tuning (auto tuning) to
adjust power and channel settings to provide RF signals to the coverage
area for your users. You’ll then enhance the auto tuning feature by
providing modelling information about your geographic location.
and implement your network that builds on the RF Auto-Tuning method.
You will, as the name implies, still use RF Auto-Tuning (auto tuning) to
adjust power and channel settings to provide RF signals to the coverage
area for your users. You’ll then enhance the auto tuning feature by
providing modelling information about your geographic location.
To use this technique, you will complete the tasks described in “Using RF
Auto-Tuning” on page 95. Then, you’ll complete the following steps in
your network plan:
Auto-Tuning” on page 95. Then, you’ll complete the following steps in
your network plan:
1 Add site information (buildings and floors) or import a floor drawing
2 Add RF obstacles (optional)
3 Add an RF coverage area
By providing some information about your buildings and floors, you add
enough details into 3WXM so that you can better visualize your network
topology and support improved monitoring at your site.
enough details into 3WXM so that you can better visualize your network
topology and support improved monitoring at your site.
To learn more about the benefits of RF Auto-Tuning with modelling, see
“RF Auto-Tuning with Modelling” on page 30.
“RF Auto-Tuning with Modelling” on page 30.
5