3com TR User Manual
Management Prerequisites
3-5
1-800-444-4345, 1-619-455-4600, 1-703-742-4777
■
In Europe
RIPE NCC
Kruislaan 409
NL-1098 SJ
Amsterdam
The Netherlands
Telephone number:
Kruislaan 409
NL-1098 SJ
Amsterdam
The Netherlands
Telephone number:
+31 20 592 5065
■
In Asia Pacific
Asia Pacific Network Information Center (APNIC-DOM)
c/o Computer Center, University of Tokyo
2-11-16 Yayoi
Bunkyo-ku, Tokyo 113
Japan
Telephone number:
c/o Computer Center, University of Tokyo
2-11-16 Yayoi
Bunkyo-ku, Tokyo 113
Japan
Telephone number:
+81 3 3580 3782
Management Prerequisites
Before you can successfully operate and manage
the Switch 2000 TR you must assign a Unit ID
number to the device. This section describes the
necessary steps for assigning a Unit ID#.
the Switch 2000 TR you must assign a Unit ID
number to the device. This section describes the
necessary steps for assigning a Unit ID#.
The only method for assigning a Unit number is via
the LCD Console located on the front panel of the
Switch 2000 TR.
the LCD Console located on the front panel of the
Switch 2000 TR.
Locate the LCD Console and proceed as follows:
1
Power on the Switch 2000 TR.
Switch 2000 TR>Unit ID 6 appears in the LCD Console.
This is the factory default.
This is the factory default.
2
Press [Enter] to enter the working menu of the LCD
Console.
Console.
Switch 2000 TR>Unit appears.
3
Press [Enter].
UNIT>Unit # appears.
4
Press [Enter].
Unit #>6 appears.
5
Press the [Down Arrow] once. The number 1 appears.
6
Press [Enter]. The Unit ID number has now been set.
7
Press [Left Arrow] twice to return to the main LCD
Console menu.
Console menu.
Continue with the management setup as described in
the remainder of this chapter.
the remainder of this chapter.