3M 200a User Manual
6
(Specifications continued on next page)
Specifications
1. Power Requirements:
Electrical - 115 VAC, 60 Hz, 1.9 A (220 watts)
The machine is equipped with a 1/6 HP gearmotor and comes with a standard neoprene covered power cord
and a grounded plug. Contact your 3M Representative for power requirements not listed above.
2. Operating Rate:
Box drive belt speed is approximately 0.4 m/s [78 feet per minute].
IMPORTANT SAFEGUARD
IMPORTANT SAFEGUARD
4. Tape:
Scotch brand pressure-sensitive film box sealing tapes.
5. Tape Width:
36 mm [1 1/2 inch] minimum to 48 mm [2 inch] maximum.
3. Operating Conditions:
Use in dry, relatively clean environments at 5
o
to 40
o
C [40
o
to 105
o
F] with clean, dry boxes.
Note: Machine should not be washed down or subjected to conditions causing moisture condensation
on components.