3M trizact diamond for fiber optics, 60-4400-7180-5 User Manual
Designed for polishing
zirconia and other
ceramic UPC connectors.
zirconia and other
ceramic UPC connectors.
3M
TM
Trizact
TM
Diamond
Lapping Film is comprised
of tiny structures, produced
with 3M’s microreplication
technology. These structures
contain precisely graded
diamond particles. As these
structures wear down, fresh
mineral is continually exposed
resulting in a consistent, high
cut rate through the long life
of the abrasive.
of tiny structures, produced
with 3M’s microreplication
technology. These structures
contain precisely graded
diamond particles. As these
structures wear down, fresh
mineral is continually exposed
resulting in a consistent, high
cut rate through the long life
of the abrasive.
Compared to conventional
diamond lapping films,
3M
diamond lapping films,
3M
TM
Trizact
TM
Diamond
Lapping Film provides:
• Superior durability
• Higher cut rate
• Finer finish
• Less subsurface damage
• Better clad edge quality
• Improved productivity
• Improved yield
• Higher cut rate
• Finer finish
• Less subsurface damage
• Better clad edge quality
• Improved productivity
• Improved yield
3M Trizact Diamond Lapping
Film, 661XA is available in 9,
2, and 0.5 micron grades for
angle grinding and ferrule
radiusing. Discs and sheets are
available for use on a variety
of polishing machines.
Film, 661XA is available in 9,
2, and 0.5 micron grades for
angle grinding and ferrule
radiusing. Discs and sheets are
available for use on a variety
of polishing machines.
3
Trizact
TM
Diamond Lapping Film for
Fiber Optic Connector Polishing
Longer lasting for improved productivity
and better yield
and better yield