Arcam dv79 User Manual

Page of 42
DV79
E-2
E
n
g
li
s
h
DV79
E-3
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ATTENTION
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing 
to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated 
‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the product.
CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and 
insert the plug fully into the socket.
Safety guidelines
Important safety instructions
This product is designed and manufactured to meet strict 
quality and safety standards. However, you should be aware 
of the following installation and operation precautions:
1. Take heed of warnings and instructions
You should read all the safety and operating instructions 
before operating this appliance. Retain this handbook for 
future reference and adhere to all warnings in the handbook 
or on the appliance.
2. Water and moisture
The presence of electricity near water can be dangerous. Do 
not use the appliance near water – for example next to a 
bathtub, washbowl, kitchen sink, in a wet basement or near 
a swimming pool, etc.
3. Object or liquid entry
Take care that objects do not fall and liquids are not 
spilled into the enclosure through any openings. Liquid 
filled objects such as vases should not be placed on the 
equipment.
4. Ventilation
Do not place the equipment on a bed, sofa, rug or similar 
soft surface, or in an enclosed bookcase or cabinet, since 
ventilation may be impeded. We recommend a minimum 
distance of 50mm (2 inches) around the sides and top of the 
appliance to provide adequate ventilation.
5. Heat
Locate the appliance away from naked flames or heat 
producing equipment such as radiators, stoves or other 
appliances (including other amplifiers) that produce heat.
6. Climate
The appliance has been designed for use in moderate 
climates.
7. Racks and stands
Only use a rack or stand that is recommended for use with 
audio equipment. If the equipment is on a portable rack it 
should be moved with great care, to avoid overturning the 
combination.
8. Cleaning
Unplug the unit from the mains supply before cleaning.
The case should normally only require a wipe with a soft, 
damp, lint-free cloth. Do not use paint thinners or other 
chemical solvents for cleaning.
We do not advise the use of furniture cleaning sprays or 
polishes as they can cause indelible white marks if the unit 
is subsequently wiped with a damp cloth.
9. Power sources
Only connect the appliance to a power supply of the type 
described in the operating instructions or as marked on the 
appliance.
10. Power-cord protection
Power supply cords should be routed so that they are not 
likely to be walked on or pinched by items placed upon or 
against them, paying particular attention to cords and plugs, 
and the point where they exit from the appliance.
11. Grounding
Ensure that the grounding means of the appliance is not 
defeated.
12. Power lines
Locate any outdoor antenna/aerial away from power lines.
13. Non-use periods 
If the unit has a stand-by function, a small amount of 
current will continue to flow into the equipment in this 
mode. Unplug the power cord of the appliance from the 
outlet if left unused for a long period of time.
14. Abnormal smell
If an abnormal smell or smoke is detected from the 
appliance, turn the power off immediately and unplug the 
unit from the wall outlet. Contact your dealer immediately.
15. Servicing
You should not attempt to service the appliance beyond that 
described in this handbook. All other servicing should be 
referred to qualified service personnel.
16. Damage requiring service
The appliance should be serviced by qualified service 
personnel when:
A.  the power-supply cord or the plug has been damaged, 
or
B.  objects have fallen, or liquid has spilled into the 
appliance, or
C.  the appliance has been exposed to rain, or
D.  the appliance does not appear to operate normally or 
exhibits a marked change in performance, or
E.  the appliance has been dropped or the enclosure 
damaged.
Safety compliance
This product has been designed to meet the IEC 60065 
international electrical safety standard.