Avision 1200p User Manual

Connect iVina 1200P to your computer as shown in Figure 2-2.

1. Plug one end of the supplied scanner cable to the parallel port at the back of the scanner and

the other end into your computer where the printer port cable was plugging.

2. Connect the small end of the power adapter into the power jack on the back of the scanner.

3. Plug the large end of the power adapter to the power outlet. Now, the scanner will be

automatically powered on.

Figure 2-2 Cable connection

Open the document cover and then place your original face down on the document glass as shown
in Fig. 2-3.  Make sure to align the upper right corner of your original to the alignment mark.

Figure 2-3 Placing the original

1.  Scanner
2.  Host computer
3.  Parallel port
4.  Power cable
5.  Scanner cable(supplied)
6.  Printer cable(not supplied)
7.  Printer

1. Document cover
2. Original document
3. Alignment mark
4. Document glass