AEG 1000 User Manual

 
 

25 

 

Fig. 1: Pre-installation of the left and right rails 

2. 

Now locate the corresponding installation positions in the 
rack and place two cage nuts at each post corresponding to 
the position of the rails. Use 8 cage nuts for each rail pair.

 

 

 

Fig. 2

 

: Fastening the rails in the rack 

 

3.  Now insert the rails. According to the illustration above, 

fasten the rails to the rear post with two screws each; in the 
front, first use the lower screw. Now tighten all the screws, 
including the 3 screws each on the rail itself. 

4.  Repeat these steps for each individual tray. 

Front of rack 

Rear of rack 

Left rail 

Right rail