ATIKA bh 700 User Manual
8
Contents
Extent of delivery
8
Declaration of conformity
8
Description of device / Spare parts
8
Operating times
8
Symbols machine
8
Symbols used in the original instructions
9
Proper use
9
Residual risks
9
Safety instructions
9
Assembly 11
Start-up 11
Working instructions
Start-up 11
Working instructions
12
Working with the tiller
12
Maintenance and cleaning
12
Transport
13
Storage
13
Possible faults
13
Technical data
14
Guarantee
14
Extent of delivery
After unpacking, check the contents of the box
> That it is complete
> Check for possible transport damage
> Check for possible transport damage
• 1 Pre-assembled device
• 1 Lower handle hoop
• 1 Upper handle hoop
• 1 Screw bag
• 1 Original instructions
• 1 Assembly and operating instruction sheet
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately.
the manufacturer immediately.
EC Declaration of Conformity
according to EC directive: 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Bodenhacke (Tiller) type BH 700 and BH 800
Serial number: see last page
Serial number: see last page
is conform with the above mentioned EC directive as well as with
the provisions of the guidelines below:
the provisions of the guidelines below:
2004/108/EC, 2000/14/EC.
Following harmonized standards have been applied:
EN 60335-1:2002+A1+A11+A12+A2+A13;
EN 60335-1:2002/FprAF:2009; EN 62233:2008;
EN 55014-1:2006; EN 55014-2:1997+A1; EN 61000-3-2:2006;
EN 61000-3-3:1995+A1+A2; EN 709:1997+A2:2009
EN 60335-1:2002+A1+A11+A12+A2+A13;
EN 60335-1:2002/FprAF:2009; EN 62233:2008;
EN 55014-1:2006; EN 55014-2:1997+A1; EN 61000-3-2:2006;
EN 61000-3-3:1995+A1+A2; EN 709:1997+A2:2009
Conformity assessment procedure: 2000/14/EC - Appendix V.
BH 700
BH 800
Measured level of the acoustic output
L
WA
92,3 dB (A) 92,7 dB (A)
Guaranteed level of the acoustic
output L
WA
93 dB (A)
93 dB (A)
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department – Schinkelstr. 97
59227 Ahlen – Germany
ATIKA GmbH & Co. KG – Technical department – Schinkelstr. 97
59227 Ahlen – Germany
Ahlen, 17.05.2010 A. Pollmeier, management
Description of device / Spare
parts
Pos. Denomination
Order-no.
BH 700
BH 800
1 Handle
381594
2 Switch
handle
3 Safety
knob
4 Switch-plug
unit
381503
5
Cable strain relief
381595
6 Cable
holder
381526
7
Upper handle hoop left
381593
8
Upper handle hoop right
381592
9 Lower
handle
hoop
381591
10 Body
cover
381580
11
Screw M6x45
390143
12 Washer
A6.4
391634
13
Star grip M6
385028
14 Safety
label
381579
15 Connecting
rod
381590
16 Blade
protection
17 Blade
drum
381586 381587
Operating times
Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for the
noise control.
pertaining to corresponding laws (regional provisions) for the
noise control.
Symbols machine
Carefully read
original instructions
before handling the
machine.
original instructions
before handling the
machine.
Shut off engine
and remove power
cord before
performing
cleaning,
maintenance or
repair work.
and remove power
cord before
performing
cleaning,
maintenance or
repair work.