APRILIA pegaso 650 User Manual
45
use and maintenance Pegaso 650
U
Extract the wheel pin (3) manually and
take the washer (6).
take the washer (6).
U
Make the rear wheel advance and re-
lease the drive chain (7) from the crown
gear (8).
lease the drive chain (7) from the crown
gear (8).
U
Withdraw the wheel from the rear fork
from behind, carefully withdrawing the
disc from the brake caliper.
from behind, carefully withdrawing the
disc from the brake caliper.
Never pull the rear brake lever
after removing the wheel, other-
wise the caliper piston may go
after removing the wheel, other-
wise the caliper piston may go
out of its seat, thus causing the outflow
of the brake fluid. In this case consult
your
of the brake fluid. In this case consult
your
APRILIA Official Dealer, who will
carry out the proper maintenance oper-
ation.
ation.
REASSEMBLY
Carefully insert the disc in the
brake caliper.
brake caliper.
U
Position the rear wheel between the rods
of the rear fork.
of the rear fork.
U
Make the wheel advance and position
the drive chain (7) on the crown gear (8).
the drive chain (7) on the crown gear (8).
Risk of injuries.
Do not use your fingers to align
the seats.
Do not use your fingers to align
the seats.
U
Make the wheel move backwards and
align the pin seat on the wheel hub with
the pin seats on the rods of the rear fork.
align the pin seat on the wheel hub with
the pin seats on the rods of the rear fork.
Grease the wheel pin, see p. 68
(LUBRICANT TABLE).
(LUBRICANT TABLE).
To facilitate the insertion of the
wheel pin, slightly raise the
wheel.
wheel pin, slightly raise the
wheel.
U
Insert the wheel pin (3) complete with
washer (6) from the left side of the vehi-
cle.
washer (6) from the left side of the vehi-
cle.
Make sure that the wheel pin has
been inserted completely.
been inserted completely.
U
Fit the washer (5) and screw the nut (4)
completely.
completely.
U
Check the chain tension, see p. 46
(CHAIN).
(CHAIN).
U
Lock the wheel pin (3) rotation by means
of the suitable spanner and tighten the
nut (4).
of the suitable spanner and tighten the
nut (4).
Wheel pin-nut driving torque:
100 Nm (10 kgm).
100 Nm (10 kgm).
Due to the weight and dimen-
sions of the vehicle, the follow-
ing operation cannot be per-
sions of the vehicle, the follow-
ing operation cannot be per-
formed by one person only.
Proceed with care and make sure that
you can support the weight of the vehi-
cle.
Proceed with care and make sure that
you can support the weight of the vehi-
cle.
Weight of the vehicle without
driver (ready for starting): 200 kg.
driver (ready for starting): 200 kg.
U
Raise the rear part of the vehicle and re-
move the support positioned under the
engine during disassembly.
move the support positioned under the
engine during disassembly.
U
Lower the vehicle and position it on the
stand.
stand.
U
Correctly position the oil pan guard (2).
U
Screw and tighten the four screws (1).
After reassembly, pull the rear
b r a k e l e v e r r e p e a t e d l y a n d
check the correct functioning of
b r a k e l e v e r r e p e a t e d l y a n d
check the correct functioning of
the braking system.
Check the wheel centering.
Have the driving torques, centering and
balancing of the wheel checked by your
balancing of the wheel checked by your
APRILIA Official Dealer, in order to avoid
accidents that may be harmful for you
and/or other people.
accidents that may be harmful for you
and/or other people.
a
a
a
a
c
c
a
c
a