APRILIA mxv 450 User Manual

Page of 121
04_22
04_23
04_24
If topping-up is necessary after the
check, do as follows:
Remove the radiator cap (1).
Loosen the bleed valve (2) loca-
ted on the left radiator.
Tilt the vehicle to the left.
Top-up with coolant through the
radiator cap (1) until fluid comes
out through the bleed valve (2).
Close the bleed valve (2).
Place the vehicle upright with
the two wheels on the ground.
Top-up through the radiator cap
(1) until the radiator plates are
fully covered. Do not exceed this
level; otherwise, coolant will spill
out during engine operation.
Refit the radiator cap (1).
CAUTION
DO NOT ADD ADDITIVES OR OTHER
SUBSTANCES TO THE FLUID.
WHEN USING A FUNNEL OR ANY
OTHER ELEMENT, MAKE SURE IT IS
PERFECTLY CLEAN.
CAUTION
IN THE EVENT OF EXCESSIVE COOL-
ANT CONSUMPTION, CHECK COOL-
ING SYSTEM FOR LEAKS.
HAVE ANY MALFUNCTION RE-
PAIRED BY AN Official aprilia Dealer.
Als na de controle moet bijgevuld wor-
den, moet als volgt gehandeld worden:
Verwijder de dop van de radiator
(1).
Los de ontluchtingsklep (2) die
zich op de linker radiator be-
vindt.
Hel het voertuig naar links.
Vul koelvloeistof bij langs de
opening van de radiatordop (1)
tot vloeistof uit de ontluchtings-
klep (2) stroomt.
Sluit de ontluchtingsklep (2).
Plaats het voertuig in de vertica-
le positie met de twee wielen op
de grond.
Vul bij langs de opening van de
radiatordop (1) tot de vloeistof
de platen van de radiator hele-
maal bedekt. Overschrijdt dit
peil niet, anders zal de vloeistof
tijdens de werking van de motor
uitstromen.
Plaats de radiatordop (1) weer.
LET OP
VOEG GEEN ADDITIEVEN OF ANDE-
RE STOFFEN TOE AAN DE VLOEI-
STOF.
WANNEER MEN EEN TRECHTER OF
IETS ANDERS GEBRUIKT, MOET DE-
ZE PERFECT SCHOON ZIJN.
65
4 Maintenance / 4 Onderhoud