APRILIA scarabeo 500 Manual
SCARABEO 500
SCARABEO 500
DEALER INSTRUCTION SHEET
DEALER INSTRUCTION SHEET
Before carrying out any maintenance
operation or inspection of the front wheel, if
possible hoist the vehicle onto a solid and
level surface with suitable equipment.
When disassembling and reassembling the
front wheel, take extra care not to damage
the brake lines, discs or pads.
Failure to carry out these checks may lead to
serious injury or damage to the vehicle.
Very little time is required, and the benefits
in terms of safety are enormous.
possible hoist the vehicle onto a solid and
level surface with suitable equipment.
When disassembling and reassembling the
front wheel, take extra care not to damage
the brake lines, discs or pads.
Failure to carry out these checks may lead to
serious injury or damage to the vehicle.
Very little time is required, and the benefits
in terms of safety are enormous.
The components in this handbook are supplied
disassembled, and have to be fitted to the motor
cycle. These instruction sheets for dealers describe
the correct fitting procedures.
Read the instructions in the sheets to avoid
breakages or incorrect assembly.
disassembled, and have to be fitted to the motor
cycle. These instruction sheets for dealers describe
the correct fitting procedures.
Read the instructions in the sheets to avoid
breakages or incorrect assembly.
Remove the rear street case from the packing case,
containing the mirrors, battery and components.
containing the mirrors, battery and components.
After removing the nailed-on supports and
crosspieces from the crate (used for transport
purposes), push the motor cycle off the bottom of
the crate and position it on the stand.
You can now proceed with the operations described
below.
crosspieces from the crate (used for transport
purposes), push the motor cycle off the bottom of
the crate and position it on the stand.
You can now proceed with the operations described
below.
.
Pag. 1
Scarabeo 500
Scarabeo 500
Pag. 8
2
aprilia part #8104640
- 06/03 -
USA
Release 04-0
7/03
1
FITTING THE DEFLECTORS
For fitting the deflectors, follow the
instructions given in the instruction sheet p/
no. E 107158.
instructions given in the instruction sheet p/
no. E 107158.
For the sake of safety, before starting
the vehicle, carry out a thorough preliminary
check. See the PRELIMINARY CHECK LIST IN
THE VEHICLE OPERATION AND MAINTENANCE
HANDBOOK.
check. See the PRELIMINARY CHECK LIST IN
THE VEHICLE OPERATION AND MAINTENANCE
HANDBOOK.
FITTING THE STORAGE BOX
••••• Lift the seat (1), after releasing it with the
appropriate key.
For fitting the storage box to the scooter,
follow the instructions given in the
instruction sheet p/no. E 107158.
follow the instructions given in the
instruction sheet p/no. E 107158.
In the USA version, there is no wiring
for stoplights on the storage box.
SAFETY MESSAGES
The following warning messages are used on all
the instruction sheets to draw your attention to the
situations described below.
the instruction sheets to draw your attention to the
situations described below.
DANGER
Safety warning symbol. When you see
this symbol on the motorcycle or instruction
sheets, beware of potential injury hazards.
Failure to observe the instructions following
these symbols may affect your safety, the
safety of others and that of the motor cycle!
Risk of serious injury or death.
Possible risk of slight injury or damage to
motor cycle.
sheets, beware of potential injury hazards.
Failure to observe the instructions following
these symbols may affect your safety, the
safety of others and that of the motor cycle!
Risk of serious injury or death.
Possible risk of slight injury or damage to
motor cycle.
Risk of serious injury or death.
Possible risk of slight injury or damage to
motor cycle.
motor cycle.
CAUTION
INTRUCTION FOR REMOVING
MOTORCYCLE FROM CRATE
IMPORTANT
The word “IMPORTANT”is written before any
important information on the instruction sheet.
important information on the instruction sheet.