Arctic Cooling Accelero XTREME Plus Installation Instruction
Accelero XTREME Plus
Installation Manual
Installation Manual
For further information, please consult www.arctic.ac
Preparation
1
2
2
Not cleaning RAMs and voltage regulators thoroughly with an
eraser leads to no adhesiveness of the thermal adhesive at all.
eraser leads to no adhesiveness of the thermal adhesive at all.
Accessories
Screws x 4 (M3)
Washers x 4
VGA Bracket x 1
No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written permission of ARCTIC COOLING Switzerland AG. In no event shall
ARCTIC COOLING its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.
means, except documentation kept by the purchaser for backup purposes, without the express written permission of ARCTIC COOLING Switzerland AG. In no event shall
ARCTIC COOLING its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.
©
Copyright
2010 ARCTIC COOLING Switzerland AG. All Rights Reserved.
2010 ARCTIC COOLING Switzerland AG. All Rights Reserved.
Deutsches Handbuch online verfügbar.
Le manuel en français est disponible en ligne.
Manual en espanol disponible en línea
Manual em Portugues disponível online.
Svensk manual tillgänglig online.
N?vod v ceštine dostupný online.
A magyar kézikönyv az interneten is elérheto.
Polski podrecznik dostepny na stronie internetowej
Nederlandstalige handleiding is online beschikbaar.
Thermal Compound
The thermal compound is already pre-applied to the heatsink. If the cooler has to be installed a second time, we highly recommend using the ARCTIC MX-3 or the ARCTIC MX-4 from ARCTIC. Only our compound guarantees
optimal performance in combination with the surface of our heatsinks.
The thermal compound is already pre-applied to the heatsink. If the cooler has to be installed a second time, we highly recommend using the ARCTIC MX-3 or the ARCTIC MX-4 from ARCTIC. Only our compound guarantees
optimal performance in combination with the surface of our heatsinks.
1. Purchase the corresponding Accelero XTREME Plus Accessories Set at vga.arctic.ac
2. Follow the installation instructions provided with the Accessories Set.
2. Follow the installation instructions provided with the Accessories Set.
Price included worldwide shipping. Shipping time: 7 – 10 days.
*Be aware that the thermal adhesive comes with a very short shelf life and shall be used within 1 week.
*Be aware that the thermal adhesive comes with a very short shelf life and shall be used within 1 week.
Installation of the voltage regulator heatsink
and RAM heatsinks (sold separately)
Package Content
Price (USD)
Set
Compatible Models
ATI Radeon HD 5870, 5850, 5830, 4890, 4870, 4850, 4830, 3870, 3850
nVIDIA GeForce GTS 250, 9800GTX+, 9800GTX
ATI Radeon HD 5870, 5850, 5830, 4890, 4870, 4850, 4830, 3870, 3850
nVIDIA GeForce GTS 250, 9800GTX+, 9800GTX
Mounting plate, RAM, voltage regulator and NVIO chipset heatsinks set, thermal adhesive*
$6.95
VR002
nVIDIA GeForce GTX 285, 280, 275, 260+, 260
Mounting plate, RAM and voltage regulator heatsinks set, thermal adhesive*
$6.95
VR003
nVIDIA GeForce GTX 470, 465
Mounting plate, RAM and voltage regulator heatsinks set, thermal adhesive*
$6.95
VR004
nVIDIA GeForce GTX 480
VR001
RAM and voltage regulator heatsinks set, thermal adhesive*
$6.95
2
Screw M3
X 4
Washer X 4
1
Installation of Accelero XTREME Plus
Do not fasten the screws completely in
one step. Fasten each screw alternately
(screw A -> D -> B -> C) with 1 to 2
clockwise rotations. Repeat until all 4
screws are tightened.
one step. Fasten each screw alternately
(screw A -> D -> B -> C) with 1 to 2
clockwise rotations. Repeat until all 4
screws are tightened.