Austro Flamm cosmo User Manual
Cosmo
6 english
Figure 5: Close the Primary Air
As soon as the wood logs are burning well, you
can regulate the heating capacity with the
secondary air slider. (Slider set to the maximum
(“AUF”) setting produces maximum heat – see
Figure 2.)
When adding wood to the fire, follow the same
procedure as when igniting the fire: Open primary
air, open secondary air, carefully open firebox
door, lay wood on the fire, close the firebox door.
Wait until the added wood catches fire and is
burning. Then close the primary air. Subsequently
regulate the fire with the secondary air supply.
can regulate the heating capacity with the
secondary air slider. (Slider set to the maximum
(“AUF”) setting produces maximum heat – see
Figure 2.)
When adding wood to the fire, follow the same
procedure as when igniting the fire: Open primary
air, open secondary air, carefully open firebox
door, lay wood on the fire, close the firebox door.
Wait until the added wood catches fire and is
burning. Then close the primary air. Subsequently
regulate the fire with the secondary air supply.
4. THE MOST IMPORTANT SPARES - OVERVIEW
Gaskets
Description
Nr. drawing Part number
Flat gasket 8 x 2 x 1550 mm
23
710096
Round gasket d= 8 x 490 mm
21
710049
Round gasket d= 12 mm
20
710338
Keramott
Description
Nr. drawing Part number
Cosmo Keramott lateral brick
3/7
710023
Cosmo Keramott rear brick
4
710024
Cosmo Vermiculite baffle plate
6
712063
Cosmo steel baffle plate
5
712062
Cosmo wood retainer
8
712061
Cosmo grate
1
712064
Cosmo/G3 riddling grate
2
713122
Keramott numbering = installation instructions!
Other parts
Description
Nr. drawing Part number
Cosmo door glass
22
716706
Stove lacquer
--
650002
Wood/coal igniter
--
640067
Glass cleaner ½ litre
--
640070
Accessories
You can obtain floor plates of glass or steel, fireplace utensils and care products from your certified
dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.