avolites diamond ii User Manual

AVOLITES  DIAMOND II OPERATORS MANUAL 

 

 

 

File d2man.doc  Revision  14      05/12/2001 

 

page 3 4

 

•

  Select the instruments. Press the Function button containing the table. 

The table is listed on the screen. 

•

  Use the cursor buttons to select an entry in the table. 

You may use the QWERTY keyboard to find an entry in a table. (Early 
versions will only sort on the first letter, you must then use the cursor buttons 
to move to the correct entry). 
You may now press [ENTER] if you know the entry is correct, or you may 
press the [TAB] button to try the selected entry without leaving the table 
allowing other entries to be tried. 

•

  Press [ENTER] to set the programmer and leave the table , or press [EXIT] or 

[ESC] on the QWERTY to abandon. 

 

Tables are saved whenever a show disk is made, however you may also wish to 
record a table for future productions. 
Do this by saving the personality for an instrument from the disk menu as follows:- 

•

  Press the [DISK] button. 

•

  Press button [C] from the disk menu marked Personality Options. 

You are now prompted to press an instrument select. This tells the desk 
which personality you wish to save. 

•

  Press the Instrument ADD button.  

If a number of the same type of instruments are patched you can press any 
ADD button. 

From the keypad you may select channels, groups focuses and apply levels to these. 

From the program menu use the keypad to select the channel number. 
Once the first numeric on the keypad has been touched the menu will change as 
follows. 
 
[A]   THROUGH 
[B]    
[C]    
[D]   PRESET FOCUS or GROUP 
[E]    
[F]   AT PERCENT 

•

  Use button [A] marked THROUGH and select the second channel.