act actpro iom User Manual
ACTPro IOM
ver 1.0
Applications
Elevator control
In this application, a user presents a card to the proximity reader when he enters the
cab. This enables the buttons for the floors the user has access to. The buttons stay on
for a programmable amount of time (normally 5 seconds) and then switch off.
cab. This enables the buttons for the floors the user has access to. The buttons stay on
for a programmable amount of time (normally 5 seconds) and then switch off.
Alarm Systems
The unit can be programmed to fire a relay on alarm events such as tamper, door
forced, mains fail etc. It can also monitor the status of certain inputs and switch an
output when the input changes state. All changes are fully logged in ACTWinPro
complete with timestamp.
forced, mains fail etc. It can also monitor the status of certain inputs and switch an
output when the input changes state. All changes are fully logged in ACTWinPro
complete with timestamp.
Building Management
The IOM allows the ACT3000/ACT2000 to be used in building management
applications. It can switch an output to turn on heating or lighting at certain times or
only when someone is present. It can also switch off heating when the last person has
left the room, saving on energy costs.
applications. It can switch an output to turn on heating or lighting at certain times or
only when someone is present. It can also switch off heating when the last person has
left the room, saving on energy costs.
CCTV systems
Using an IO Module allows switching of CCTV cameras when someone enters a
room or when access is denied.
room or when access is denied.
2