Autotek autocad raster design 2010 User Manual

you make to the image frame are reflected immediately in the Insertion
Values dialog box.

16 Optionally, to change the color of the image frame, under Color, click

Select.

NOTE Inserting a 

 (page 382) changes the foreground color.

When you insert a bitonal image, ProdNameShort first looks for the foreground
color in the correlation source specified. If it cannot find the color information,
the foreground color defaults to current color.

17 Click Finish. The image is inserted into the drawing.

1 In the Insert Options section of the Insert Image dialog box, choose

Insertion dialog box.

2 After you have chosen your insert option and image file name, click

Open.

3 In the Image Insertion dialog box, review and modify correlation data

on the available tabs.

It is recommended that you review and modify data on the tabs from left
to right: Assign Color Map, Source, Modify, Transform, then Insertion.
Use the Source tab to see settings linked to the image, then modify the
settings as required on the Modify and Transform tabs, finally review the
results on the Insertion tab before inserting the image into the drawing.
For more information about the settings on each tab, click the Help
button on the tab or use the following links:

■

 (page 325)

■

 (page 326)

■

 (page 327)

■

 (page 329)

■

 (page 328)

4 On the Insertion tab, click Finish. The image is inserted into the drawing.

26 | Chapter 2   Inserting and Correlating Images