Avanti IM20SS Instruction Manual
Page 3 of 5
P/N 8005055
Rev. D 12/00
P/N 8005055
Rev. D 12/00
Antenna Mounting Instructions:
Clean outside of window where antenna is to be mounted with included cleaning packet.
Window should be free from moisture, dirt and oil. Peel adhesive backing from antenna
mast and place antenna carefully against surface of window. The three provided mast clips
should be snapped onto the mast. Place clips provided at end of mast, and on each side of
mast coil (See below for placement). Peel adhesive backing from antenna mast clips and
attach to the window.
Window should be free from moisture, dirt and oil. Peel adhesive backing from antenna
mast and place antenna carefully against surface of window. The three provided mast clips
should be snapped onto the mast. Place clips provided at end of mast, and on each side of
mast coil (See below for placement). Peel adhesive backing from antenna mast clips and
attach to the window.
Mount AN-200 horizontally
on non-tinted window
Antenna Mast Clip