Adaptec 29320A User Manual
2
Installing the Adaptec SCSI Card 29320A
1
Discharge any static electricity build-up before handling your
SCSI card by touching a grounded metal object (like the
exposed metal parts on the back of your computer).
SCSI card by touching a grounded metal object (like the
exposed metal parts on the back of your computer).
Warning:
Turn OFF power to the computer and disconnect
the power cord.
2
After you turn off your computer and unplug the power cord,
remove the cover from the computer.
remove the cover from the computer.
3
Locate an unused 64-bit PCI/PCI-X expansion slot and remove
the expansion slot cover. If the computer does not have a 64-bit
slot, you can install the card in a 32-bit PCI slot. The Adaptec
SCSI Card 29320A supports both 5V and 3.3V 64-bit slots. (The
expansion slot must be compliant with PCI Rev. 2.1 or PCI-X
Rev. 1.0 and must support Bus Mastering.) Save the slot cover
screw for use in Step 4.
the expansion slot cover. If the computer does not have a 64-bit
slot, you can install the card in a 32-bit PCI slot. The Adaptec
SCSI Card 29320A supports both 5V and 3.3V 64-bit slots. (The
expansion slot must be compliant with PCI Rev. 2.1 or PCI-X
Rev. 1.0 and must support Bus Mastering.) Save the slot cover
screw for use in Step 4.
Slot cover screw
Expansion slot cover
64-bit PCI slot
32-bit PCI slot
ASC-29320A IG.fm Page 2 Tuesday, July 29, 2003 3:30 PM