HP color laserjet 1600 series Service Manual
11
Product settings. This section lists the following information that is gathered during software installation:
●
Language
●
Company name
●
Jam recovery settings (if set to ON, the last page will reprint if there is a paper jam)
●
I/O timeout information (default is 120 seconds)
9
Paper types. This section contains information about paper types that can be configured by the user. The default
settings are Plain.
settings are Plain.
8
Status log. This section contains information about printer errors, including an error log code and the page count
at which the error occurred. For a list of status log messages, see
at which the error occurred. For a list of status log messages, see
.
NOTE
The color bars on the sides of the Configuration page represent 100%, 75%, 50%,
and 25% coverage.
Event log
Information for the last five events is available on the Configuration page under the Status log
section. For more information, see
section. For more information, see
.
For a list of messages that only appear in the event log, see
Supplies Status page
The Supplies Status page lists the remaining life of the HP print cartridges. It also lists the estimated
pages remaining, number of pages printed, and other supplies information. You can print a Supplies
Status page from the device or HP Toolbox. To print from the device, complete the following steps.
pages remaining, number of pages printed, and other supplies information. You can print a Supplies
Status page from the device or HP Toolbox. To print from the device, complete the following steps.
1.
Press the (
Left arrow
) or the (
Right arrow
) buttons to select the Reports.
2.
Press (
Select
).
3.
Use the (
Left arrow
) or the (
Right arrow
) buttons to select Supplies Status.
4.
Press (
Select
) button to print the Supplies Status page.
132
Chapter 6 Troubleshooting
ENWW