HP color laserjet 1600 series Service Manual
Overview
Removal and replacement strategy
Replace parts in the reverse order of their removal. Directions for difficult or critical replacement
procedures are included in this section.
procedures are included in this section.
WARNING!
The sheet-metal edges of the product can be sharp. Use caution when working
on the product.
NOTE
Note the length, diameter, color, type, and location of each screw. Be sure to return
each screw to its original location during reassembly. Incorrectly routed or loose wire
harnesses can interfere with other internal components and can become damaged or broken.
Frayed or pinched harness wires can be difficult to locate. When replacing wire harnesses,
always use the provided wire loops, lance points, or wire harness guides.
harnesses can interfere with other internal components and can become damaged or broken.
Frayed or pinched harness wires can be difficult to locate. When replacing wire harnesses,
always use the provided wire loops, lance points, or wire harness guides.
Electrostatic discharge
The printer contains parts that are sensitive to electrostatic discharge (ESD). Watch for the ESD
reminder shown at the left when removing printer parts. Protect the parts that are sensitive to ESD
with protective ESD pouches.
reminder shown at the left when removing printer parts. Protect the parts that are sensitive to ESD
with protective ESD pouches.
User-replaceable parts
Table 5-1
User-replaceable parts
Product name
Description
Part number
Separation pad and pickup rollers
Replace when the printer is picking up
multiple sheets or no sheets. Trying
different paper did not resolve the
problem.
multiple sheets or no sheets. Trying
different paper did not resolve the
problem.
Q5956-67902
Paper tray
A 250-sheet paper cassette.
Q5956-67901
Dust cover
Protects the output of paper cassette
from dust.
from dust.
Q5956-67903
Output tray extender
An extension for supporting paper in
the output bin.
the output bin.
Q5956-67904
Required tools
Before servicing the printer, gather the following tools:
●
Phillips #2 magnetized screwdriver (152 mm (6 inch) shaft)
●
Small flat-blade screwdriver
●
Small needle-nose pliers
●
ESD strap
●
Penlight (optional)
60
Chapter 5 Removal and replacement
ENWW