HP color laserjet 1600 series Service Manual
7.
Firmly close the front door.
After a short time, the control panel should display Ready.
NOTE
If a cartridge is in the wrong slot or is the wrong type for the printer, the control
panel will display one of the following messages: Incorrect yellow, Incorrect magenta,
Incorrect cyan, or Incorrect black.
Incorrect cyan, or Incorrect black.
8.
Installation is complete. Place the used print cartridge in the box in which the new cartridge
arrived. See the enclosed recycling guide for recycling instructions.
arrived. See the enclosed recycling guide for recycling instructions.
9.
If you are using a non-HP print cartridge, check the printer control panel for further instructions.
NOTE
When replacing or changing a black print cartridge, a cleaning page will automatically
print. This helps prevent speckles on the front or back of printed documents. For a more
thorough cleaning, see
thorough cleaning, see
.
ETB removal and replacement
Use the following procedure to remove the ETB (RM1–1881–000CN).
1.
Remove or slightly pull out Tray 2 (RM1–1916–000CN).
64
Chapter 5 Removal and replacement
ENWW