HP deskjet 600 User Manual
Fonts
HP DeskJet 600, 700, 800, 900 & HP 2000 Series PCL Developer’s Guide
99
11.2.22
Placement
HP DeskJet 600/800/900 & HP 2000 Series printers ignore this field.
11.2.23
Underline Position (SBYTE)
Bitmap Font - Specifies the distance from the baseline to the top dot row of the underline in
dots. Zero specifies an underline position at the baseline. A positive value specifies an under-
line position above the baseline. A negative value specifies an underline position below the
baseline.
dots. Zero specifies an underline position at the baseline. A positive value specifies an under-
line position above the baseline. A negative value specifies an underline position below the
baseline.
Scalable Font - Set to 0. Underline Distance is ignored. The Master Underline Position field
identifies this information for scalable fonts.
identifies this information for scalable fonts.
HP DeskJet 600 and 85X Series printers use this field for auto-underlining.
11.2.24
Underline Thickness (UBYTE)
Specifies the thickness of the underline in dots for a bitmap font.
Bitmap Font - Specified in dots. A bitmap font prints 3-dot thick underlines at 300 dpi and 6-
dot thick under- lines at 600 dpi.
dot thick under- lines at 600 dpi.
Scalable Font - Should be ignored and set to 0. The Master Underline Height provides this
information.
information.
HP DeskJet 600 and 85X Series printers use this field for auto-underlining.
11.2.25
Text Height (UINT)
Specifies the font’s optimum interline spacing for this font. This value is typically 120% of the
height of the font.
height of the font.
Bitmap Font - Specified in quarter-dot units.
Scalable Font - Specified in design window units (defined in the Scale Factor field).
11.2.26
Text Width (UINT)
Specifies the font’s average lowercase character width (it can be a weighted average).
Bitmap Font - Specified in quarter-dots.
Scalable Font - Specified in design window units (defined in the Scale Factor field).
!
!