HP dv2500 User Manual
9.
Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter.
10.
Remove the display inverter.
Reverse this procedure to install the display inverter.
Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
250-GB, 5400-rpm
453949-001
160-GB, 5400-rpm
452060-001
120-GB, 5400-rpm
452059-001
80-GB, 5400-rpm
452058-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the
computer.
computer.
Component replacement procedures
45