HP dv2500 User Manual

14.1-inch, WXGA, BrightView, display assembly for use only with computer models equipped with a
camera module (includes camera module, microphones, and WLAN transceivers and antenna cables)

448604-001

14.1-inch, WXGA, BrightView, display assembly for use only with computer models not equipped
with a camera module (includes microphones and WLAN transceivers and antenna cables)

448603-001

14.1-inch, WXGA, BrightView, display assembly for use only with computer models sold at Best Buy
(includes camera module, microphones, and WLAN transceivers and antenna cables)

451906-001

Before removing the display assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.

Remove the battery (see 

Disconnect the wireless antenna cables from the WLAN module (see 

).

Remove the following components:

Keyboard (see 

Switch cover (see 

Remove the display assembly:

Close the computer and turn it upside down, with the rear panel toward you.

Remove the Phillips PM2.5×9.0 screw that secures the display assembly to the computer.

Turn the computer display-side up, with the front toward you.

Component replacement procedures

59