HP omnibook xe3 Service Manual
2-8
Removal and Replacement
HP OmniBook XE3
Figure 2-5. Removing the Mini-PCI Card
Reassembly Notes
•
Reattach the cable (modem models only) or cables (modem/LAN models only) to the PCA, and
tuck them into the compartment.
tuck them into the compartment.
•
Gently press the mini-PCI card into the connector at an angle of about 30°, until it is fully inserted.
Then press down on both sides of the card until the latches snap closed.
Then press down on both sides of the card until the latches snap closed.