HP omnibook xe3 Service Manual
HP OmniBook XE3
Removal and Replacement
2-41
Component
Removal Procedure
Additional Steps
Doors, PCMCIA
Mini-PCI card (page 2-7).
Keyboard cover
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
Hard disk drive assembly
Hard disk drive assembly
(page 2-13).
Display assembly
(page 2-17).
Top case assembly
(page 2-19).
Hinge saddle set
(page 2-22).
Video PCA (page 2-25).
Heatsink assembly
Heatsink assembly
(page 2-25).
CPU module (page 2-29).
Floppy disk drive assembly
Floppy disk drive assembly
(page 2-31).
CD-ROM/DVD drive
(page 2-33).
Motherboard (page 2-34).
See the figure on page 2-39.
Drive, CD-ROM/DVD
See page 2-33.
Drive, floppy disk
See page 2-29.
Heatsink (with fan)
See page 2-25.
Keyboard
See page 2-11.
PCA, CD player
See page 2-22.
PCA, headphone
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
Display assembly
Display assembly
(page 2-17).
Top case (page 2-19).
Hinge saddle set
Hinge saddle set
(page 2-22).
Remove the retaining screw from the PCA, disconnect
the cable to the motherboard, and lift the PCA out of
the notebook. You can lift the floppy drive slightly for
access.
the cable to the motherboard, and lift the PCA out of
the notebook. You can lift the floppy drive slightly for
access.
PCA, motherboard
See page 2-34.
PCA, switchboard
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
Remove both screws (M2.5x4) from the PCA, and
carefully lift the PCA off of the connector beneath it.
carefully lift the PCA off of the connector beneath it.
Be
careful not to pull on the cable attached to the PCA.
Disconnect the cable from the PCA and remove the
PCA from the notebook.
Disconnect the cable from the PCA and remove the
PCA from the notebook.
PCA, video
See page 2-25.