HP omnibook xt1000 Service Manual

2-28 

Removal and Replacement 

HP Pavilion zt1100/xz100 Omnibook xt1000 

 

 

 

 

5.  Disconnect the touch pad cable and the CD player PCA cable from the motherboard. 

6. If present, remove the wireless cables from their slot in the top case. 

7.  Remove the retaining screws from the top case. 

8. Remove the retaining screw from the right speaker, disconnect its wires from the motherboard, and 

lift the speaker out of the notebook. 

9.  Raise the back of the top case, then gradually loosen it, moving around the edges of the case 

toward the front of the notebook. 

 

When removing the top case, be careful not to pull on the cable that connects the CD player PCA 
in the top case to the notebook. 

 

10. Carefully lift the top case forward and off of the notebook. 

11. Disconnect the volume control PCA cable from the motherboard (if present). 

Screws, 
M2×4mm (3) 

Screws, 
M2×4mm (2) 

Screws, 
M2×4mm (2) 

Screws, 
M2.5x6mm (3) 

Screws, 
M2.5x6mm (2) 

14-in chassis 

15-in chassis 

Screws, 
M2.5x6mm (7)