HP r5500 User Manual
Installation 22
2.
Connect the device power cords to the appropriate output receptacles on the rear panel of the UPS.
To provide additional receptacles:
•
Plug a PDU or other device into the high current, large output receptacle. The large output receptacle
is part of load segment 1 and can be turned off and on using power management software (on page
is part of load segment 1 and can be turned off and on using power management software (on page
•
Plug an extension bar into any IEC-320-C19 receptacle to yield eight additional IEC-320-C13
receptacles.
receptacles.
Connecting the UPS cord retention clips
Charging the UPS batteries
With the UPS in Standby mode, allow the batteries to charge before putting the UPS into service.
IMPORTANT: Charge the batteries for at least 24 hours before supplying backup power to devices. The
batteries charge to: