HP r12000 xr User Manual

Select System Setup from the Main Menu to enter the menu for changing system setup 
options. 

 

Main Menu 

System Setup 

To change the system setup, you must enter the correct password. Use the Center and Enter 
buttons to select the six digits for the password [0-9 and A-Z]. 

 

NOTE:  The password must be six characters long. The default password is 

COMPAQ

. To establish or 

change the password, refer to the section, “Setting the Password,” in this chapter. 

 

Enter Password 

COMPAQ 

1.  Select the first digit using the up and down arrow keys on the Center button. 

2.  Press the right arrow key on the Center button to move to the next digit.  

3.  To change a digit, use the left arrow key on the Center button to go back. 

4.  After entering the entire password, press the Enter button. 

 

IMPORTANT:  Record your password. After 30 minutes with no key presses, security is 
automatically restored and the display changes to the main status display. 

Select Comm Setup from the System Setup menu to set up the baud rate for the 
communication ports and option slots. 

 

System Setup 

Comm Setup 

 

Comm Setup 

Serial Port x 

Select the communication port to set up. x is either 1 or 2. 

Comm Setup 

Opt-Slot x 

Select the option slot to set up. x is either 1 or 2.