HP scanjet 7400c User Manual

Connecting the scanner

Connecting the scanner

Connecting the scanner

Connecting the scanner

You must have a SCSI card installed before you install the scanning software. Then, 
install the scanning software BEFORE physically connecting the scanner to the 
SCSI card. 
If you have other SCSI devices to connect to the SCSI card, connect the scanner to 
the last device in the chain. For more information, see the documentation that came 
with the SCSI card. 

Testing the SCSI installation

Testing the SCSI installation

Testing the SCSI installation

Testing the SCSI installation

Test the SCSI installation to see if it is working.

To test the SCSI installation

Turn off the computer and disconnect the power cable from the scanner.

After 30 seconds, reconnect the power cable to the scanner. 

Turn on all other external SCSI devices and then turn on the computer.

On the Start menu, point to Settings, and click Control Panel.

For Windows 98, 2000, and Me: 
1

On the Start menu, point to Settings, and click Control Panel.

Double-click Scanners and Cameras.

Select your scanner model, such as the HP ScanJet 7400C, from the list and 
click Properties.

Click Test Scanner or Camera. 

When the test finishes, you receive a message indicating if the test passed or 
failed. If test failed, see 

For Windows NT 4.0: 
Windows NT 4.0 does not provide an automatic method for testing the SCSI 
installation. If you experience problems with the SCSI installation, see