HP qms 1660 User Manual

Interfaces

QMS 1660 Print System Reference

4-30

▲

Caution: 

Before you install any optional fonts, ensure that the printer 

has enough memory, or they may not all be available for use. If it 
doesn’t, you can install SIMMs (see chapter 6, “Printer Options”) to 
increase printer memory, or you can install a hard disk (see chapter 6, 
“Printer Options”) and enable disk swapping (Administration/Memory/
Enable Disk Swap menu–see the “Memory” section, later in this 
chapter).

Removing an Optional Font

Use the Administration/Disk Operations/Remove Option menu to 
remove a previously installed optional font. See chapter 6, “Printer 
Options,” for instructions.

If an error message displays in the message window during 

this operation, press the Menu key to remove the message and 
restart the operation from the beginning. 

Interfaces

You can customize all of the printer’s interfaces through the Adminis-
tration/Communications menu. 

Setting LocalTalk Interface Parameters

Use the Administration/Communications/LocalTalk menu to set the 
LocalTalk interface values used for printer-host communication.

Mode

Enables or disables the communication interface.

Administration/Communications/LocalTalk/Mode

Enabled—Establish one-way LocalTalk communication from 

the host to the printer).

Disabled—Turn off the LocalTalk interface, and the printer 

stops accepting LocalTalk interface print jobs.