HP z558 User Manual

    HP Digital Entertainment Center TV/Display Setup Guide 

To check video: 

1 Turn off the TV/Display. 
2 Turn off the HP Digital Entertainment Center by pressing and holding the On/Standby power button for 4 

seconds. The On/Standby button should be dark and not lit amber or blue. 

3 Check the cables. Make sure that they are completely plugged in and that the green, blue, and red colors 

match. 

Green: Y, Blue: Pb, Red: Pr 

 

4 Remove all other Video Out cables from the HP Digital Entertainment Center back panel. 
5 Turn on the TV/Display. 

 

6 Check the TV/Display input switch. For example “Component 1.” 
7 Turn on the HP Digital Entertainment Center by pressing the On/Standby power button. Wait 1 to 2 minutes. 

The video image reappears. 

8 Check the screen. 

• 

If you can see the video image, optimize the HP Digital Entertainment Center video image so it fits your TV 
screen, use the TV/Display Setup Wizard. See “TV/Display Setup Wizard” on page 5. Follow the onscreen 
instructions. 

• 

If you cannot see the video image, see the next section “Connect another video out.”