Canon imageclass d1170 multifunction printer 3478b018aa User Manual
Fax (D1180/D1170/D1150)
6-49
Specifying the Way of Printing When Toner Runs Out
Specifying the Way of Printing When Toner
Runs Out
You can set if the machine stores all documents in memory or continue printing without
storing documents in memory, when the toner runs out. The default setting is <RX TO
MEMORY>.
storing documents in memory, when the toner runs out. The default setting is <RX TO
MEMORY>.
When the <TONER LOW/PREPARE NEW TONER> message appears, if you set <CONT. PRINTING> to <KEEP PRINTING>, you
can continue printing. The printed documents may be light or blurred because of lack of toner. The data is erased when
the documents are printed out, so you cannot print the same documents again.
When the <TONER LOW/PREPARE NEW TONER> message appears, if you set <CONT. PRINTING> to <RX TO MEMORY>, the
machine stores all documents in memory. After the toner cartridge is replaced, the documents can be printed and the
setting can be reset.
can continue printing. The printed documents may be light or blurred because of lack of toner. The data is erased when
the documents are printed out, so you cannot print the same documents again.
When the <TONER LOW/PREPARE NEW TONER> message appears, if you set <CONT. PRINTING> to <RX TO MEMORY>, the
machine stores all documents in memory. After the toner cartridge is replaced, the documents can be printed and the
setting can be reset.
–
–
1
Press [Menu].
2
Press
or
to select <TX/RX
SETTINGS>, then press [OK].
4 . T X / R X S E T T I N G S
M E N U
3
Press
or
to select <TX/RX
COMMON SET.>, then press [OK].
2 . T X / R X C O M M O N S E T .
T X / R X S E T T I N G S
4
Press
or
to select <RX SETTINGS>,
then press [OK].
2 . R X S E T T I N G S
T X / R X C O M M O N S E T .
5
Press
or
to select <CONT.
PRINTING>, then press [OK].
4 . C O N T . P R I N T I N G
R X S E T T I N G S
6
Press
or
to select <RX TO
MEMORY> or <KEEP PRINTING>, then
press [OK].
R X T O M E M O R Y
C O N T . P R I N T I N G
<RX TO MEMORY>: The machine stores all
documents in memory.
<KEEP PRINTING>: You can continue printing.
<KEEP PRINTING>: You can continue printing.
7
Press [Stop/Reset] to return to the
standby mode.
–
–