Canon imageclass d1170 multifunction printer 3478b018aa User Manual

Page of 305
xx
Legal Notices
Legal Notic
es
Users in the U.S.A.
Pre-Installation Requirements for Canon Facsimile Equipment
A. 
Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 14, “Appendix,” for specific 
dimensions and weight.
B. 
Order Information
1.  A single telephone line (touch-tone or rotary) should be used.
2.  Order an RJ11-C telephone wall jack (USOC), which should be installed by the telephone company. If 
the RJ11-C wall jack is not present, telephone/facsimile operation is not possible.
3.  Order a normal business line from your telephone company’s business representative. The line 
should be a regular voice grade line or an equivalent one. Use one line per unit.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse dial) telephones. A 
dedicated extension off a PBX (Private Branch eXchange) unit without “Call Waiting” can be used with your facsimile unit. Key telephone 
systems are not recommended because they send nonstandard signals to individual telephones for ringing and special codes, which 
may cause a facsimile error.
C. 
Power Requirements
The machine should be connected to a standard 120 volt AC, three-wire grounded outlet only.
Do not connect this machine to an outlet or power line shared with other appliances that cause 
“electrical noise.” Air conditioners, electric typewriters, copiers, and machines of this sort generate 
electrical noise that often interferes with communications equipment and the sending and receiving of 
documents.