Canon imageclass d1170 multifunction printer 3478b018aa User Manual

Page of 305
11-2
M
ain
tenanc
Cleaning the Machine
Cleaning the Machine
Note the following before cleaning your machine:
Make sure no documents are stored in memory when you turn OFF the main power switch 
and disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to 
the components or generate static charges.
Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to clean the machine. These can 
damage the machine components.
When you turn OFF the main power switch, the documents stored in memory will be erased. To check the jobs stored in memory, 
see the following:
“Canceling Copy Jobs,” on p. 3-5.
“Checking and Canceling Print Jobs,” on p. 4-12.
“Checking/Changing the Status of Fax Documents in Memory,” on p. 6-62.
“Checking/Changing the Status of Scan to File Server Documents,” in the e-Manual.
“Checking/Changing the Status of E-Mail Documents,” in the e-Manual.





Exterior
Clean the exterior of the machine.
1
 
Turn OFF the main power switch and 
disconnect the power cord.
2
 
Wipe the machine’s exterior with a clean, 
soft, lint-free cloth dampened with water 
or diluted dishwashing detergent 
solution.
3
 
Wait for the machine to dry, then 
reconnect the power cord and turn ON 
the main power switch.
Fixing Unit
If black streaks appear with printing, the Fixing Unit 
in the main unit may be dirty. Should this occur, 
clean the Fixing Unit in the following procedure. 
The Fixing Unit should also be cleaned each time 
the toner cartridge is replaced.
 Use standard paper as the cleaning paper.
Cleaning the Fixing Unit takes approximately 150 seconds.
When some jobs are stored in memory, this function is not 
available.
1
 
Press   [Menu].