Canon imageclass d1170 multifunction printer 3478b018aa User Manual

D

ocumen

ts and P

rin

t M
edia 

Loading Paper

When loading paper into the multi-purpose 
tray, align the paper stack neatly between the 
slide guides. If the paper is not loaded correctly, 
a paper jam may occur.
If you are printing on heavyweight paper or 
envelopes using the multi-purpose tray, and 
find that the paper or envelopes are not being 
fed smoothly or evenly through the multi-
purpose tray, remove the paper or envelopes, 
curl the feeding edges upward approximately 
1/8” (3 mm), and then reload the paper or 
envelopes. Curling the feeding edges enables 
the rollers to grip the paper or envelopes as 
they are fed into the machine from the multi-
purpose tray.

If there are instructions on the paper package 
about which side of the paper to load, follow 
those instructions.
When the paper is loaded into the multi-
purpose tray, the side facing down is the one 
printed on.
If problems, such as poor print quality or paper 
jams occur, try turning the paper stack over and 
reload it.

–

–

–

–

–

■ If you are loading envelopes into the multi-

purpose tray:

① Take five envelopes, loosen them as shown, 

and then stack them together.  
Repeat this step five times for each set of 
five envelopes.

② Place the envelopes on a clean, level 

surface, and press all the way around the 
envelopes by hand, in the direction of the 
arrows, to remove any curls. Repeat this 
step five times for each set of five 
envelopes.

Take particular care to spread the envelopes out in 
the direction that they will be fed.