Canon color imagerunner c3080 User Manual

Setting Up a Computer for Printing/Sending a Fax

Usi

ng a NetBIOS Netw

o

rk

 

NOTE

 

If you are using Windows Vista, a dialog box may be displayed while you are performing 
the procedure. In this case, enter a user name and password. For more information, see 
the manuals provided with the operating system.

Check the settings for both <RX/Print Range> and <Setting/
Browsing Range> in [IP Address Range Settings] on the IPv4 
Settings screen, to see whether the IPv4 address of the 
computer in which a driver is to be installed is permitted. See 
step 17 in "TCP/IP Settings (IPv4)," on p. 3-3.

IMPORTANT

 

•

If the settings for both <RX/Print Range> and <Setting/Browsing Range> in [IP 
Address Range Settings] on the IPv4 Settings screen do not permit the IPv4 
address, you cannot install a driver.

•

If the IPv4 address of the computer is beyond the range of the permitted addresses 
set for <RX/Print Range> after installing a driver, you cannot print or send a fax 
from the computer.

Install the driver according to the following procedures indicated in the manual 
for each driver.

•

If you want to use the PCL printer driver
See the procedure for standard installation in Chapter 2, "Getting Started," in 
the 

PCL Driver Guide

.

•

If you want to use the PS printer driver 
See the procedure for standard installation in Chapter 2, "Getting Started," in 
the 

PS Driver Guide

.

•

If you want to use the UFR II printer driver 
See the procedure for standard installation in Chapter 2, "Getting Started," in 
the 

UFR II Driver Guide

.

•

If you want to use the fax driver
See the procedure for standard installation in Chapter 2, "Getting Started," in 
the 

Fax Driver Guide

.

When the dialog box for selecting the port appears during installation, click [Use 
Network Printer] 

➞ [Settings]. From the list, select [Workgroup], [Server], and 

[Printer] you set in "SMB and WINS Settings," on p. 5-3.