Canon eos 300d User Manual
63
3Selecting an AF Point
After achieving focus, you can lock the focus on a subject and
recompose the shot. This is called “focus lock.”
recompose the shot. This is called “focus lock.”
Focus Lock
Automatic AF point Selection
Manual AF point Selection
Set the camera to a Creative Zone mode.
•
Set a Creative Zone mode except <Q>.
1
Select the desired AF point.
2
Aim the AF point over the subject and press the
shutter button halfway to focus.
shutter button halfway to focus.
3
Keep pressing the shutter button halfway and
recompose the image as desired.
recompose the image as desired.
4
Shoot.
5
Under low-light conditions, the built-in flash fires a brief burst of flashes
when you press the shutter button halfway. This is to illuminate the
subject to enable easier autofocusing.
when you press the shutter button halfway. This is to illuminate the
subject to enable easier autofocusing.
AF-Assist beam with the Built-in Flash
•
The AF-assist beam does not function in the <I>, <P> and <S>
modes.
•
The built-in flash’s AF-assist beam is effective up to about 4 meters/13.2
feet.
•
In the Creative Zone modes when the built-in flash is popped up with the
<M> button, the AF-assist beam may be emitted.