Canon i860, i865 Service Manual
2. LIST OF ERROR DISPLAY / INDICATION
Errors are indicated by the LED, and warnings are displayed on the monitor of the computer connected to
the printer.
the printer.
2.1 Operator Call Errors (by LED Blinking in Orange)
LED
blinking in
orange
Error Solution
Remarks
No paper. (ASF) [1000]
Set the paper in the ASF, and press
the Resume/Cancel button.
the Resume/Cancel button.
No CD-R tray. [1001]
*1
Set the CD-R tray, and press the
Resume/Cancel button.
Resume/Cancel button.
No paper in the photo paper
tray. [1004]
tray. [1004]
Set the paper in the photo paper
tray, and press the Resume/Cancel
button.
tray, and press the Resume/Cancel
button.
2 times
No paper in the paper feed
cassette. [1003]
cassette. [1003]
*2
Set the paper in the paper feed
cassette, and press the
Resume/Cancel button.
cassette, and press the
Resume/Cancel button.
Paper jam. [1300]
Paper jam in the auto duplex
printing unit. [1304]
Paper jam in the auto duplex
printing unit. [1304]
*3
3 times
Paper jam in the paper feed
cassette. [1303]
cassette. [1303]
*2
Remove the jammed paper, and
press the Resume/Cancel button.
press the Resume/Cancel button.
4 times
No ink.
[1601/1602/1611/1612/1613]
[1601/1602/1611/1612/1613]
Replace the empty ink tank(s), or
press the Resume/Cancel button.
press the Resume/Cancel button.
Pressing the
Resume/Cancel button
will exit the error
without ink tank
replacement, however,
ink may run out during
printing.
Resume/Cancel button
will exit the error
without ink tank
replacement, however,
ink may run out during
printing.
5 times
The print head is not installed
[1401], or it is not properly
installed (EEPROM data of
the print head is faulty)
[1403/1405].
[1401], or it is not properly
installed (EEPROM data of
the print head is faulty)
[1403/1405].
Install the print head properly, and
close the front cover.
Or, with the print head installed,
turn the printer off and on.
close the front cover.
Or, with the print head installed,
turn the printer off and on.
No CD-R tray feeder (during
CD-R printing). [1850/1855]
CD-R printing). [1850/1855]
Set the CD-R tray and tray feeder
properly, and press the
Resume/Cancel button.
properly, and press the
Resume/Cancel button.
6 times
*1
Presence of the CD-R tray
feeder (during paper printing).
[1851/1856]
feeder (during paper printing).
[1851/1856]
Remove the CD-R tray feeder, and
press the Resume/Cancel button.
press the Resume/Cancel button.
7 times
*1
No CD-R or DVD-R. [1002]
After setting a CD-R or DVD-R in
the tray, set the tray in the tray
feeder, and press the
Resume/Cancel button.
the tray, set the tray in the tray
feeder, and press the
Resume/Cancel button.
8 times
Warning: The waste ink
absorber becomes almost full
(approx. 95% of the maximum
capacity).
absorber becomes almost full
(approx. 95% of the maximum
capacity).
Pressing the Resume/Cancel button
will exit the error, and enable
printing.
In repair servicing, replace the
bottom case unit (QM2-0586), or
5-item set of the ink absorbers
(QC1-2232/2233/2234/2235/2236).
will exit the error, and enable
printing.
In repair servicing, replace the
bottom case unit (QM2-0586), or
5-item set of the ink absorbers
(QC1-2232/2233/2234/2235/2236).
The service call error,
indicating the waste ink
absorber is full, is likely
to occur soon.
indicating the waste ink
absorber is full, is likely
to occur soon.
9 times
The connected digital camera
or digital video camera does
not support Camera Direct
Printing. [2001]
or digital video camera does
not support Camera Direct
Printing. [2001]
After removing the cable between
the camera and the printer, press
the Resume/Cancel button, and
re-connect the cable.
the camera and the printer, press
the Resume/Cancel button, and
re-connect the cable.
When connected to a
Direct Print supported
camera, the green LED
blinks 2 times.
Direct Print supported
camera, the green LED
blinks 2 times.
1 - 4