Canon i9900, i9950 Service Manual
1 - 5
(Operator Call Errors - cont’d -)
LED
blinking
in orange
Error Solution
Remarks
11 times
Automatic print head alignment
failure [2500]
failure [2500]
Press the Resume/Cancel
button, and after confirming the
following, perform print head
alignment again:
- Set an appropriate type and
button, and after confirming the
following, perform print head
alignment again:
- Set an appropriate type and
size of paper (plain paper, A4
or letter).
or letter).
- Check that the print head
alignment pattern is properly
printed (all ink ejected, no
faint printing).
printed (all ink ejected, no
faint printing).
- Check that the paper ejection
slot is not exposed to light.
- When there are no problems
in the three items above,
perform manual print head
alignment.
perform manual print head
alignment.
*1: Only the i9950 model supports CD-R printing.
*2: Use the CD-R tray with a “A” mark in the lower left.
*2: Use the CD-R tray with a “A” mark in the lower left.
(Using a CD-R tray with no mark is not possible.)
When not performing CD-R printing, store the CD-R tray by hanging it on the projections on the back side of the
printer.
*3: When setting the CD-R, align the marks on the CD-R tray to the marks on the paper output tray.
printer.
*3: When setting the CD-R, align the marks on the CD-R tray to the marks on the paper output tray.
Use the CD-R tray with an “A” mark.