Canon imageclass 2300 Information Guide
List of Error Messages
10-7
TRANSMITTING...
Cause 1
During the current transmission, your machine may have tried to send a
document identified from the list of documents in memory.
document identified from the list of documents in memory.
Remedy
Resend the document when transmission of the first document is complete.
Cause 2
You tried to send a document using direct sending while sending another
document from memory.
document from memory.
Remedy
Wait until the transmission from memory is complete. Then resend the
document using direct sending.
document using direct sending.
TX LIMIT REACHED
Cause
Sending has been restricted.
Remedy
Set <RESTRICT TX> from the DEPT. ID MANAGEMENT menu to 'OFF'. (See
Chapter 5, "System Manager Settings," in the Reference Guide.)
Chapter 5, "System Manager Settings," in the Reference Guide.)
WRONG PAPER SIZE SETTING
Cause
It is possible that the paper size detected automatically by the paper drawer
does not match the actual paper size. Another possibility is that the paper size
selected for the stack bypass in the USE STACK BYPASS menu does not
match the paper size actually set on the stack bypass.
does not match the actual paper size. Another possibility is that the paper size
selected for the stack bypass in the USE STACK BYPASS menu does not
match the paper size actually set on the stack bypass.
Remedy
Make sure the actual paper size matches the selected paper size. Set the
correct paper size and open the front cover, then close it.
correct paper size and open the front cover, then close it.
T
roub
leshooting
10