Canon pixma mp180 User Manual

Page of 128
Chapter 10 
99
Troubleshooting
Cannot Connect To PC Properly
„
Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work
You have a defective Setup 
CD-ROM.
If you have a defective Setup CD-ROM, please consult your sales or service 
representative.
Make sure the CD-ROM is readable from Windows Explorer.
Reconfirm that the CD-ROM icon is displayed when you insert the CD-ROM.
Installation procedure not 
followed correctly.
Follow the Easy Setup Instructions packaged with your machine for proper MP 
Driver installation.
If the MP Driver was not installed correctly, uninstall the MP Driver, and restart 
your computer. Try to reinstall the MP Driver.
If the installer was forced to be terminated due to an error, Windows may be 
unstable. Remove the CD-ROM from the CD-ROM drive and restart your computer.
Reinstall the MP Driver.
Cause
Action
Your environment is not 
fully compatible with USB 
2.0.
If your environment is not fully compatible with USB 2.0, the machine will operate 
at a lower speed provided under USB 1.1. In this case, the machine operates 
properly but printing speed may slow down due to communication speed.
Check the following to ensure that your Computer environment supports USB 2.0 
Hi-Speed connection.
z
The USB port on your Computer supports USB 2.0 Hi-Speed connection.
z
Both the USB cable and USB hub support USB 2.0 Hi-Speed connection.
Be sure to use a certified USB 2.0 Hi-Speed cable. You are recommended to use 
the cable no longer than 3 meters.
z
Your Computer supports the USB 2.0 Hi-Speed connection.
Obtain the latest version of the USB 2.0 Hi-Speed driver and install it on your 
Computer.
z
The USB 2.0 Hi-Speed driver operates properly.
Obtain the latest version of the USB 2.0 Hi-Speed driver and install it on your 
Computer.
Cause
Action
downloadlike
ArtboardArtboardArtboard
Report Bug